Standard Features throughout the range.

• Single-acting
• Typically pin mounted
• Provision for grease nipples at both ends
• Headed gland nuts for reducing servicing downtime
• Zinc plated glands nuts for added corrosion resistance
• Double lipped asymmetric piston seal design manufactured in high-performance polyurethane
• Heavy-duty wiper ring featuring a front flap that covers the gland face preventing a water/slurry trap so common with conventional wiper
• Piston bearing rings: all pistons fitted with two bearings to give maximum internal support, manufactured to very tight tolerances and made from woven fabric reinforced with a polyester resin
• Gland bearing rings: all gland nuts fitted with 30/40mm long hard-wearing Acetal bearing strip

TUBE:–: All tubes manufactured from ready to use smooth bore, EN10305-2 specification, E355 steel grade. If required chrome plated, the tubes are finished with a hard chrome plate deposit minimum thickness 0.025mm

ROD:–: Non chromed rods manufactured from 070M20 steel, chromed rods manufacture from either CK45 (EN8) or 20MnV6 (EN14)

ALL PISTON TYPE TELESCOPIC HYDRAULIC CYLINDERS ARE PRESSURE TESTED ON A PURPOSE-BUILT RIG TO A PRESSURE OF 241 BAR (3500 PSI) AND THEN STAMPED WITH PART, JOB, & SERIAL NUMBERS, WEIGHT, MANUFACTURE DATE AND MAX W/PRESSURE FOR FULL IDENTIFICATION. ALL TONNAGES CALCULATED AT 2000 PSI (137 BAR).